When using a residual limb sock with the KISS System, it is necessary to
cut a proximal hole into the sock, to allow the proximal strap to exit through
the socket. The iron-ons 4X225 prevent fraying after the hole is cut. Place an
iron-on accordingly on the sock and then cut the hole with a hole puncher.
7 Cleaning
Please clean the hook and loop closure on a regular basis.
8 Liability
The manufacturer recommends using the device only under the specified
conditions and for the intended purposes. The device must be maintained
according to the Instructions for Use. The device must only be operated with
tested modular components in accordance with the MOBIS Mobility System.
The manufacturer is not liable for damage caused by component combinations
that were not authorised by the manufacturer.
9 CE Conformity
This device meets the requirements of the 93 / 42 / EEC guidelines for medical
devices. This device has been classified as a class I device according to the
classification criteria outlined in appendix IX of the guidelines. The declaration
of conformity was therefore created by the manufacturer with sole responsibility
according to appendix VII of the guidelines.
1 Champ d'application
INFORMATION
Date de la dernière mise à jour : 2013-03-04
• Veuillez lire attentivement l'intégralité de ce document.
• Respectez les consignes de sécurité.
Le système KISS est exclusivement destiné à l'appareillage prothétique des
amputés transfémoraux.
10 | Ottobock
Français