Connection Of Fume Exhaust Vent; Electrical Connection - Angelo Po 191BR1G Manual De Uso

CONNECTION OF FUME EXHAUST VENT

Important
Make the connection in compliance with
the relevant legal requirements, using ap-
propriate and recommended materials.
Connecting to a flue with
natural draught
To carry out this operation,
proceed as follows.
1 - Connect the appliance's
exhaust outlet to the flue
(A) using a line comply-
ing with the dimensions
shown in the diagram.
Connecting to a fan extractor hood
To carry out this operation, proceed as follows.
1 - Position the appliance underneath the
hood (B) and connect a line of the dimen-
sions shown in the diagram to the appli-
ance's exhaust outlet.

ELECTRICAL CONNECTION

Important
IT
The connection must be made by author-
ised, skilled personnel, in accordance with
the relevant legal requirements, using ap-
GB
propriate and specified materials. The ap-
pliance is supplied with operating voltage
DE
230V/1N.
FR
ES
A
English
B
The fan of the extraction system must
switch on automatically when the gas sup-
ply tap is turned on.
Before doing any work, cut off the mains elec-
tricity supply.
Connect the appliance to the mains electricity sup-
ply as follows.
1 - If not already present, install a circuit-breaker
D
C
- 18 -
Important
Caution - warning
(A) with overload cutout and differential safety
breaker close to the appliance.
E D
A
IDM-39603312400.tif
IDM-39616001800.tif