Publicidad
Idiomas disponibles
Idiomas disponibles
13. CLEAR MEMORY
Press
key. If memory has previously been cleared the display will show
when the
key is pressed.
14. HOW TO SET DATUM
Press
key move and blinks the current digit to.
Press
key increment the current digit to the next available value.
15. BATTERY CAPACITY
When the indicator is being poer on/off, battery capacity will be displayed
When the battery capacity is less than 20%, the display will start to blink, power off the indicator to avoid
over discharging battery or connect the external main power suply.
A full charged battery life is approximately 30 hours.
16. UNIT OF WEIGHING (kg and lb)
kg or lb is selectable. The unit of weighing is kg normally. You can change it to lb by pressing and holding
key 2 seconds at least.
17. CONNECTION TO MINI-PRINTERS
Connect serial port printer type UP-16TS as follows:
* Note: Before connection to printer, communication address is set as Adr=1; baud rate is set as b=9600.
Print operation with serial port printer is as follows:
17.1 Print: at weighing status, weighing data >20d and display is stable, press
The second printing can be operated only when the weighing data is back to <20d.
17.2 Accumulated print: at weighing status, press
17.3 Set to be automatic accumulation status, i.e. automatic print.
At weighing status, weighing data >20d and display is stable, weighing sheet is printed out. The second printing
can be operated only when the weighing data is back to <20d and more weight is loaded.
Attached with print sample:
Normal printing
No:1 (serial number)
Gross: 3940 kg (gross weight)
Tare: 2000 kg (tare weight)
Net:
1940 kg (net weight)
BR80 and BR90 indicators user manual
Indicator
9 pin hole
3
5
Serial Port Printer
25 pin needle
TXT
2
GND
7
, then press
, accumulated printing can be operated.
Accumulation printing
No:9 (serial number)
W: 8225 kg (accumulated weight)
23
followed by zero weight
for 1.5 seconds.
, weighing sheet is printed out.
Publicidad
