Error Codes - Oster CKSTPCEC6801-013 Manual De Instrucciones

All About "E" Notification Codes and How to Resolve Them:
Your Express Crock has been designed to help you achieve just the right results for every
meal. If the Express Crock notices that something in the recipe or cooking cycle needs
to be optimized at any point, it will stop cooking and give you an "E" Notification Code on
the display screen. These "E" Notification Codes are very easy to resolve, and ensure
that your meal gets cooked to perfection.
Error
"CLOSE LID"
Ensure that the Lid is closed completely and in the LOCKED
blinking light
Display "E1" The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and contact service
center.
Display "E2" The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and contact service
center.
Display "E3" The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker, and allow to cool down
completely. Once Multi-Cooker has cooled down, check all parts of the Lid (See page
16). Turn Lid to LOCKED
position. If this error code occurs again, unplug Multi-Cooker and contact service center.
Display "E4" The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker, and allow to cool down
completely. Once Multi-Cooker has cooled down, check Cooking Pot to ensure there is
enough liquid inside. Add more liquid if necessary (Minimum 250ml). Ensure no steam is
coming out of Cooking Pot before placing Lid back on Multi-Cooker. Turn Lid to LOCKED
cooking function, and then press START/STOP.
Display "E5" The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and allow to cool. Once
it is cooled down, remove the Lid and check the Cooking Pot. Do not use the Lid when
using the BROWN/SAUTÉ function.
When using the SLOW COOK function, make sure that the Steam Release Valve is in the
"Release" (open) position before starting the cooking cycle.
Display "E6" The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and allow to cool. Once
it is cooled down, remove the Lid and check the Cooking Pot. Add liquid as necessary.
Ensure a minimum of 250ml of liquid is used inside the removable Cooking Pot. If using a
pressure cooking function, ensure that the Steam Release Valve is in the "Seal" (closed)
position.
CKSTPCEC6801_18SEM1.indd 16

ERROR CODES

.
position. Ensure Steam Release Valve is in "Seal" (closed)
position. Ensure Steam Release Valve is in "Seal" (closed) position. Select a pressure
Solution
E 16
position, aligning with
5/14/18 10:18