Using Interacoustics Video Otoscope; Pre-Heating And Light Source; White Balance; Capturing Pictures/Video - Interacoustics Viot Manual De Instrucciones

3 Using Interacoustics Video Otoscope

Pre-heating and light source

There is a light source in the Viot™ which allows you to illuminate the ear canal during use. When the Viot™
is connected to the PC the light source will not immediately be switched on. Only when opening the Suite
you will notice that the light source and camera image is enabled allowing you to view the image which the
Viot™ can capture.

White balance

The Viot™ does not require a white-balance procedure and it will handle this automatically.

Capturing pictures/video

The Capture button can be used for capturing pictures and for starting & stopping video recordings.
Alternative ways of capturing are pressing the spacebar and using the mouse to press the capture button in
the Viot™ Suite. If you long-press the capture button then it will inform the suite that you wish to swap
earside.

Hardware Manual

For more information regarding the Viot™ hardware, please see the hardware manual. This includes
information on the system specification and instructions on care and management.
Viot™ - Instructions for Use - EN
Page 9