Reemplazamiento De Los Martillos Desintegradores; Motor Installation; Important; Rotor Desintegrador - JF 2D Manual Técnico De Operación

Tabla de contenido

Publicidad

7.5- Reemplazamiento de los martillos desintegradores

Los martillos desintegradores (1) pierden su capacidad (sufren desgaste) con el tiempo,
sobrecargando la máquina.
Si la máquina comienza a perder rendimiento, en la calidad de desintegrador, verifique el
estado de los martillos y cámbielos de posición si necesario, observando el orden de montaje
en la figura abajo.
Notas:
1- Los martillos poseen 4 posiciones de montaje: o sea, 4 lados desintegradores
(A, B, C y D), siendo que apenas uno de ellos ejerce acción sobre el producto,
mientras los demás prácticamente no sufren desgaste. Esto permite 3 cambios de
posición de los mismos;
- Del lado A para el lado B (1º cambio).
- Del lado B para el lado C (2º cambio).
- Del lado C para el lado D (3º cambio).
2- Tras haber usado los 4 lados de los martillos, reemplácelos a TODOS.
26
A
B
1
C
D

Rotor desintegrador

OPERATION TECHNICAL MANUAL - MILL JF 2D

4.3- Motor installation

a) Draw out the pulley (3) of the machine.
b) Attach the protection (4) with the screws (5).
I M P O R TA N T: C h e c k t h e p o w e r
requirements of the motor on page 10.
There you can find the correct work speed
and the pulley diameter of the motor and
the machine.
c) Fix the motor on the rails (7) as the side image.
d) Mount the machine pulley (3) again.
e) Mount the pulley (6) that came with the machine in the
shaft of your motor, fixing it with a keyway.
IMPORTANT: See the following pages to get different
rotations work, depending on the diameter of the pulleys
used.
6
f) Make the aligment between the motor pulley (6) and
the machine (3), according instructions on this manual.
g) Install the belt (8) according picture aside and adjust
the tightening according instructions on this manual.
h) Install the protective cover (9).
WARNING:
The cover belt is not included with the
machine when it leaves the factory
without a motor coupled.
Yo u c a n p u r c h a s e t h e s t a n d a r d
safeguards provided by JF.
The use of the equipment without the
required cover belt or guards is
prohibited.
3
4
5
7
3
6
8
9
13

Publicidad

Tabla de contenido
loading

Productos relacionados para JF 2D

Tabla de contenido