When Operating The Machine; When Making Maintenance In The Machine; Transport On Truck - JF 2D Manual Técnico De Operación

10- Diagnóstico de anormalidades y soluciones
Anormalidad
Máquina con vibración La máquina no está sobre
excesiva una base adecuada
Los tacos de goma no han
sido instalados
El rotor no está balanceado Compruebe la cantidad,
La máquina está atascada
El material picado está Filo de las cuchillas no está
deshilachado, o sea, no ha bueno
sido bien cortado
Contracuchilla con desgaste Reemplace la contracuchilla
Mucho material colocado
dentro de la boquilla de
alimentación
Rotación inadecuada del
rotor
Las partículas de material Martillos con desgaste
desintegrado no están con
tamaño adecuado
Rotación inadecuada del
rotor
Caudal muy alto de granos
Máquina atascada Filo de las cuchillas no está
bueno
Contracuchilla con desgaste Reemplace la contracuchilla
Martillos con desgaste
Mucho material colocado
dentro de la boquilla de
alimentación
Correa patinando Correa muy holgada
32
Causas Solución
Coloque la máquina sobre
una base nivelada y firme
Instalar según instrucciones
en este manual
posición de montaje de las
cuchillas y martillos
Abra la tapa del
compartimiento del rotor y
quite el material acumulado
Afile las cuchillas
Alimente la máquina de
manera continuada y
uniforme, sin exagerar
Vea la potencia del motor
usado y el diámetro de las
poleas
Afile o reemplace los
martillos
Vea la potencia del motor
usado y el diámetro de las
poleas
Ajuste el caudal
Afile las cuchillas
Afile o reemplace los
martillos
Alimente la máquina de
manera continuada y
uniforme, sin exagerar
Ajuste la tensión de la
correa o cambie la misma
OPERATION TECHNICAL MANUAL - MILL JF 2D

2.2- When operating the machine

1- The JF 2D is designed exclusively to disintegrate
grains and chop forage.
2- When supply the machine, never introduce the hands
into the feeding chute (1).
3- In order to obtain the maximum efficiency and quality
of chopped or designed material, maintain a constant
and uniform feeding.
4- To more security fasten the machine on a even and
rigid surface.
5- Never use the machine to chop tree branches or
another rigid material.
6- Never attempt to adjust or repair components with
the machine running.
7- Do not leave the machine in a place that can be
operated by children or not qualify people.
8- The cover belt is not included with the machine when it leaves the factory without a motor
coupled, but its use is MANDATORY as safety NR12 (Item 12.38. Danger areas of the
machineries and equipments must have safety systems, characterized by fixed covers,
mobile covers and safety devices interconnected to ensure health protection and physical
integrity of workers) and NR31 (Item 31.12.12 the rural employer or similar are responsible to
maintain the security systems in perfect condition and operation, which the total or partial
withdrawal or neutralization of these systems which endanger the physical integrity of
workers considered serious and imminent risk).

2.3- When making maintenance in the machine

1- Machine must be turned off for any type of maintenance.
2- Observe the specification and amount of lubricant to be used on the machine.

2.4- Transport on truck

Whenever you have to transport the machine for longer distances, when there is need for
using public roads, the transport must be done on truck or trailer.
To more safety, the machine must be fixed with rope on the truck.
1 1
1
7