FLAEM Air Pro 3000 Manual De Instrucciones página 13

RF7 PLus TECHNICAL NEBuLIsATION FEATuREs
Operating pressure bar
Nozzle flow (1) l/min'
Selector Button Position
MMAD μm (2)
(2) Breathable fraction< 5 μm (2)
Delivery ml/min' (1) approx
(1) Data recorded according to in-
ternal Flaem procedure I29-P07.5.
Delivery Speed values are subject
to variations depending on the pa-
tient's respiratory ability.
(2) In vitro characterization certi-
fied by TÜV Rheinland LGA Prod-
ucts GmbH - Germany in compli-
ance with European Standard for
Aerosol therapy apparatuses EN
13544-1. Further details are avail-
able on demand.
7. Delivery method
You can select the mode of distribution at the maximum speed or, by acting on the Select Button (C5.4) of
the RF7 Plus Nebulizer, with the active valve system.
8. Start the device by means of switch (A1) and breathe deeply in and out.
9. Upon completing application, turn off the device and unplug it.
10. If after the therapy session an evident deposit of moisture forms within the pipe (B), detach the pipe
from the nebuliser and dry it with the very ventilation from the compressor; this operation prevents pos-
sible blooms of mould inside the pipe.
with valve
2.21
84.2%
0.29
wITH VALVE
13
1,30 ± 0,1
8.2
MAX
2.38
81.5%
0.65
MAX