CAIRE Liberator Serie Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
Introduction
The Liberator reservoir is intended for the adminis-
tration of supplemental oxygen to the patient in the
end user's home and can also be used in institutions
such as nursing homes or sub-acute care facilities.
The device is not intended for life support nor does
it provide any patient monitoring capabilities. It
is recommended to have an alternate source of
supplemental oxygen in the event of mechanical
failure.
The device is used by COPD patients or those
with diminished breathing capacity. The device is
prescribed to the patient. The device is sold to a
provider that is trained to operate and service the
Liberator reservoir. The provider trains the user.
The liquid oxygen system includes the Liberator
and a portable unit, which provides you with
supplementary oxygen as prescribed by your
physician. This user manual contains the instructions
for using the Liberator. Refer to the user manual
supplied with the portable unit for its operation.
The Liberator is intended for stationary use. You
may take oxygen directly from the Liberator.
The Liberator is offered as a top fill model or a
dual top fill and side fill unit. They are filled by
your health care provider. The portable provides
an ambulatory source of oxygen for an extended
period of time. It is filled from the Liberator.
Note: The service provider will assist with the initial
setup and instruct proper handling and usage of
the unit.
Dual Fill Liberator shown.
Also available in 20, 37, 41, 45, and 60 liter models.
Controls
1. Gen 4 Meter Liquid Level Gauge
2. Flow Control Knob
3. DISS Connection
4. Liberator Side Fill connector (if applicable)
5. Liberator Release Button (Top Fill push-on style
only)
6. Liberator Top Fill Connections (QDV)
7. Vent Valve
6
7
1
PN MN234-C4 G | User Manual
Liberator
5
3
2
5 - ENG
4

Publicidad

Tabla de contenido
loading

Tabla de contenido