Orbit 28954 Manual Del Usuario página 10

The display will show
Please note that [sTART TIMe] is the time of day that
your programmed watering starts . You can set up to
4 start times at each program if you want to water
more than once per day . All stations that have a
programmed run time (how long) will run in sequence
at each start time .
Note: Start-Time Stacking
When a start time is set before the previous program has
completed, that start time will be "stacked" or delayed,
and will start upon completion of the previous program.
Example: Bill just planted new grass seed and wants
to water three times per day . he sets sTART TIMe 1
for 5am, sTART TIMe 2 for 12pm, and sTART TIMe 3
for 5 pm .
he sets the INT (interval) to water every 1 dAYs (see
section 3, hoW oFTeN) .
In AUTo mode the system will water 3 times per day .
once Bill's sod is established he can CleAR start
times 2 and 3 and return to watering just once per day .
4. Run Time
• Turn the dial to [RUN TIMe] .
• Press the PRoGRAM button to select which
program you'd like to set .
sTATIoN is the area that will be watered by each valve .
on this screen the RUN TIMe or duration for each
station is set .
• Press the [   ] to select a station and press the
[+/–] buttons to enter the watering duration for
that station .
• Press [eNTeR] or the [   ] buttons to move to
the next station/valve, and enter watering duration
for each station .
5. How Often
• Turn the dial to [hoW oFTeN] - this screen allows
you to set how often to water .
There are 3 options provided:
1 . days of the week (Mon, Tues, Wed, etc .)
2 . Intervals (every "X" number of days)
3 . odd or even days
10