Connecting The Phono Output Terminals - Technics SL-1500C Instrucciones De Funcionamiento

Connecting the PHONO output terminals

1
Turn off the unit and the
connected device, and disconnect
the AC mains leads from the socket.
2
Connect the PHONO cable and
PHONO earth lead to the PHONO
input terminals of the connected
equipment.
 Adequate volume and sound quality cannot
be obtained when connected to the external
input terminals of the connected device.
PHONO
OUT
R
PHONO PHONO
earth lead cable
R
PHONO
EARTH PHONO
Amplifier (not included)
Attention
 Tighten the PHONO earth terminal using a Phillips head screwdriver.
Note
 Stanby/on switch [
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of power.
Remove the plug from the mains socket if you will not be using the unit for an extended period of
time. Place the unit so that the plug can be easily removed.
L
External output switch
L
Make settings with the unit
turned off.
] (OFF/ON)
3
Set the external output switch to
"OFF".
4
Connect the AC mains lead.
 Confirm the wattage of the AC outlet on
the connected equipment before using it
for this unit.
For the power consumption of this unit,
see the specifications. ( 23)
Back of main unit
AC mains lead
Insert the AC mains
lead up to a point
just before the round
hole.
To a household
mains socket
13
(13)
English