Special Gas Requirements (Gas Models Sold In Massachusetts); Electrical Requirements - Samsung NY58J9850WS Usuario, Manual De Instalación

Special gas requirements (gas models sold in Massachusetts)

COMMONWEALTH OF MASSACHUSETTS REQUIREMENTS:
WARNING
Gas leaks may occur in your system,
creating a dangerous situation.
- Gas leaks may not be detected by smell
alone.
- Gas suppliers recommend you purchase
and install a UL-approved gas detector.
Gas detector should be installed in
accordance with the manufacturers
instructions.

Electrical requirements

WARNING
To reduce the risk of fire, electric shock, or
personal injury:
All ranges
• Do not use an extension cord or adapter
plug with this range.
• This range must be properly grounded.
• Check with a qualified electrician if you
are in doubt as to whether your range is
properly grounded.
• Do not modify the plug provided with
your range—if it doesn't fit the outlet, have
a proper outlet installed by a qualified
electrician.
• Range must be installed by a qualified
plumber or gas fitter by the State of
Massachusetts.
• A T-handle manual gas valve MUST be
installed in the gas supply line to your
range.
• If a flexible gas connector is used to install
your range, multiple flexible gas lines must
not be connected in series.
• All wiring and grounding must be done
in accordance with local codes or, in the
absence of local codes, with the National
Electrical Code, ANSI/NFPA No. 70 – Latest
Revision (for the U.S.) or the Canadian
Electrical Code CSA C22.1 – Latest
Revisions and local codes and ordinances.
• Wiring diagram is located on the back of
the range. (Inside of the cover back wire)
• This range is equipped with an electronic
ignition system that will not operate if
plugged into an outlet that is not properly
polarized.
English 25