Fault; Handling And Installation; Instructions And Warnings For Handling And Installation; Packaging And Unpacking - Angelo Po 0G1FT2E Manual De Uso E Instalación

TROUBLESHOOTING
The appliance has been tested before being put
into service. The information provided below is in-
tended to assist in the identification and correction
of any anomalies and malfunctions which might oc-
cur during use.
The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried

Fault

The heating elements do not
come on

HANDLING AND INSTALLATION

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

Important
All handling and installation operations
should be carried out in accordance with
current legislation on health and safety at
work.

PACKAGING AND UNPACKING

The packaging is designed to reduce space and as
appropriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for trans-
port.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are undam-
aged.
The packaging material must be properly disposed
of in accordance with legal requirements.
FAULT
out by qualified staff with recognised experience ac-
quired in the specific sector of operation.
For all requirements contact the agents or
the headquarters of Angelo Po which can
be found in the contacts section of the web-
site http://www.angelopo.com.
Cause
Electrical connection not made
correctly
Safety thermostat tripped
Switch faulty
If necessary, the person authorised to carry
out these operations must organise a "safe-
ty plan" to protect the people directly in-
volved.
- 11 -
Important
Check the connection of the
electrical wires
Carry out the appliance reset (see
Replace the switch
Important
Contact the after-sales
service.
6
Remedy
page 8)
7
GB
DE
FR
IDM-39603609700.tif
English
IT
ES