Chapter ⅡSafety Symbols; Chapter ⅢBrief Introduction Of Tiller; ⑴Major Technical Parameters - LONCIN 1WG3.5-75FQ-D Manual De Uso

The following symbols are to remind you that if you don't pay attention, you might be severely
injured. Please carefully read the symbols in the manual and notices about safety.
If these symbols peel off or are illegible, please contact the distributor to replace such symbols.
(1) Major technical parameters
Nominal power
Nominal speed
Working speed
Chapter II Safety symbols
Chapter III Brief introduction of tiller
Starting
Weight
Tilling width
Tilling depth
Transmission
Rotate speed
.
3.5 kw
3300 rev/min
Recoil start
62.5 kg
75 cm
≥10 cm
0.1 m/s～0.3 m/s
With gear in oil bath
120 rev/min
3