Chapter ⅤRunning; ⑴Steps To Start It - LONCIN 1WG3.5-75FQ-D Manual De Uso

8. Adjustment of front wheel
1）Adjust front wheel of tiller to the state shown in Fig. 15 when it is going to drive on the
road.
2）Adjust the front wheel of tiller to the state shown in Fig.16 when it is going to till the field.
Figura 15
⑴ ⑴ ⑴ ⑴ Steps to start it
Warning! Before starting the engine, gear shift lever must be put in the neutral position. Clutch
lever shall be released.
2. Put the choke lever to the CLOSE position.
3. Turn the accelerator valve regulator lever slightly to the direction for high speed
Chapter V Running
To minimum
9
Figure 16
To maximum