Approvals; Declaration Of Conformity - MicroPower Sharp 50 Instrucciones De Uso

Approvals

Declaration of conformity

Manufacturer
Micropower E.D. Marke ng AB, Idavägen 1, 35246 Växjö, Sweden, tel +46 (0) 470-727400
Equipment
Ba ery charger Sharp 30 with 24, 36 or 48 VDC nominal output and 1x230 VAC nominal input.
Ba ery charger Sharp 50 and 100 with 24, 36 or 48 VDC nominal output and 3x380-440 VAC
nominal input.
The following direc ves and standards have been applied:
Low voltage direc ve 2014/35/EU
EMC direc ve 2014/30/EU
EU RoHS Direc ve 2011/65/EU
CE Marking Direc ve 93/68/EEC
Note 1: If charger's rated output voltage is higher than 36 V it doesn't fulfil ar cle 10.101 ("The no load d.c output voltage shall not exceed
42,2V"). In some applica on is an addi onal resistor mounted between the secondary posi ve and protec ve earth for an improved ESD
protec on. In these case is not 13.3 and 16.3 fulfilled for the secondary side.
As manufacturer we declare under our sole responsibility that the equipment fulfils essen al
requirements for CE conformity according to applied direc ves and standards.
246
DECLARATION OF CONFORMITY
EN 60 335-1, EN 60 335-2-29
EN 61000-6-2, E
N 61000 -6-3
Date
2016-08-24
1
Signature
Henrik Litsin
Posi on
R&D Manager