HSM 412.2 Instrucciones De Servicio página 11

HSM 412.2
5. Start-up
Switching the paper shredder on
• Set mains switch at rear of paper
shredder to „I".
• Paper shredder is ready for ope-
ration when green LED on control
panel lights.
Notice
Safety switches are installed at
the door and funnel fl ap. Paper
shredder can only be switched on
if the door and the funnel fl ap are
both closed.
Shredding smooth paper:
• Feed paper into the paper infeed
opening (see „Technical data" for
sheet capacity)
• The shredding pro cess is star-
ted by a pho to –cell in the paper
feeding opening
• App rox. 3 sec. af ter the last sheet
of paper is pulled in the cut ting
sy stem au to ma tical ly swit ches off
and returns to standby.
The document shredder can also
be started by pressing the green
arrow button:
• Press briefl y:
Cutting device starts.
Automatic stop approx. 3 se-
conds after the last piece of pa-
per was drawn in, or manual stop
when the stop button is pressed
• Hold down for longer than 2
seconds: constant operation
without light barrier function.
The cutting device runs until it is
switched off with the stop button.
0603
Paper shredder
Shredding crumpled paper:
Destroying credit cards, CDs, discs or
DAT cassettes:
Fold the safety element down, switch the
machine on to continuous operation and feed
the material into the insertion slot.
Switching the paper shredder off
• Set mains switch at rear of paper
english
• Pull back the pusher lever and
put the paper into the fi lling
funnel.
• Press the green arrow key.
• If the cutting device does
not catch the paper by itself,
slowly move the pusher lever
forward.
Discs
Credit cards
CDs cassettes
shredder to „0".
DAT-
11