Maintenance And Care; Technical Data - HSM 412.2 Instrucciones De Servicio

HSM 412.2

7. Maintenance and care

Cleaning:
• Switch off the shredder, pull out the mains
plug.
• When cleaning only use a soft cloth and a
mild soap-water solution. Never use scou-
ring agents, cleaning fl uid, petroleum or
thinners.

8. Technical Data

Cutting type
Shred size (mm)
Sa fe ty ra ting DIN 32757 – 1
Cutting ca pa ci ty (sheets), DIN A4
Weight
Noise level (Idle running/ load)
Cutting speed
Lo ading width
Voltage
Power
for the maximum number of sheets
Dimensions W x D x H (mm)
Volume of shredded material bag
Technical and optical modifi cations reserved.
0603
Paper shredder
When the cutting capacity drops or
the noise increases:
2
70 g/m
2
80 g/m
english
• Lift the fl ap on the top of the
device and spray special cutting
block oil on the blade rollers of
the cutting device.
• Run cutting system forwards and
backwards several times without
feeding paper. Paper dust and
particles are shaken off.
Cross cut
3.9 x 50
3
38 - 40
33 - 35
85 kg
60 dB(A) / 75 dB(A)
110 mm/s
400 mm
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
2100 W
595 x 470 x 1245
146 l
13