Changing Service Data; Exiting Service Mode; Verifying Service Data Changes - Sony KLV-26M400A Manual De Servicio

2-4. CHANGING SERVICE DATA

1. Use the or arrows to select the Adjustment Item you want to
change
R_DRIVE
G_DRIVE
B_DRIVE
R_BKG
G_BKG
B_BKG
COLOR SAVE
2. To change the data value:
a. To increase the data value, press the
b. To decrease the data value, press the
3. To save the data value changes, press to select COLOR SAVE ,
then press button.

2-4-1. EXITING SERVICE MODE

After completing the changes, exit service mode.
4. To exit service mode, turn the power off by pressing POWER .

2-5. VERIFYING SERVICE DATA CHANGES

1. After completing all adjustments turn the set off with the Remote
Commander and then proceed to the next step.
2. Press the following arrows on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
3. To verify the changes repeat step 1 of 2-4. Changing Service Data.
4. To exit service mode, turn the power off by pressing POWER .
KLV-26M400A/32M400A/37M400A/40M400A
TV
256
256
256
512
512
512
arrow.
arrow.
Volume + POWER .
KLV-26M400A/32M400A/37M400A/40M400A
20