Skyport Mode; Phottix Mode - Elinchrom ELB 500 TTL UNIT Manual De Funcionamiento

SKYPORT MODE

The Skyport options allow you to select
the pulse speed (Normal or Speed
Sync mode) of the synchronisation
signal and to define group and channel
settings.
The "normal" synchronization mode is good for long distances.
The "speed" sync mode might be needed for future cameras which
may require a faster communication. The distance range reduces
by approximately 50% in speed sync mode. Any change in these
EN
settings must be applied also to the EL-Skyport Transmitter to
enable communication between the devices!
Note: We suggest to use the Normal sync mode, which is
compatible with most DSLR camera.
Finally you can choose in which group and frequency you would
like to work. Change group settings to have better control for
example between main light and second lights. Change frequency
channel to avoid interference.

PHOTTIX MODE

In the TTL mode, the Odin2 (Phottix)
remote is also supported. The setup
menu is styled accordingly to the
current Odin2 interface (see the figure
next page).
20