Attaching And Aligning The Furniture Door (Refrigerator Compartment) - Gaggenau RY 491 Instrucciones De Instalación


Measure the distance X between the adjusting rail and
the overhead furniture/fixtures.

Loosen the 2 nuts and remove the adjusting rail.

Mark this amount X on the rear of the furniture door.

Determine and mark the centerline of the furniture door.

Put on the adjusting rail and align along the marks.
Mark the drill holes.

Drill the holes.

Screw on the adjusting rail tightly.
Notes:
– Attach the adjusting rail to the furniture door with at least
6 screws. One screw should be inserted under each
double threaded bolt.
– The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.
20. Attaching and aligning the furniture
door (refrigerator compartment)

Hang the furniture door on the double threaded bolt.

Align the furniture door with the double threaded bolts
(Torx screwdriver).

Transfer the middle drill holes along the outer edge of
the appliance door to the furniture front and mark.

Remove the furniture door.
27