Technical Data; Commissioning And Operation - Proxxon BS/A 29810 Manual De Usuario

1 Key (Fig. 1)
1. Rotational speed regulating knob with On/Off
switch
2. Battery
3. Battery release button
4. Adapter for dust extraction
5. Driving roller
6. Grinding head to belt guide
7. Stretcher
8. Tightening roller
9. Grinding belt
10. Adjusting screw for belt running
11. Locking button
12. Charger

2 Technical data

Dimensions, weight:
Length:
Weight:
Grinding belt length:
Head can be swivelled by 60°
Motor:
Voltage:
Band speed:
Noise generation:
LWA: 103 dB(A)
General measuring uncertainty: K=3dB
Grip vibration:
Charger:
Mains voltage:
Output voltage:
Charging current:
Battery:
Rechargeable lithium-ion battery
Nominal/charging voltage: 10.8V/12.6V
Energy/Capacity:
3 INR 19/66
Please note that the sound and vibration mea-
surements in particular have been performed
with Proxxon bits and cutters. When using
third-party brands we cannot guarantee com-
- 10 -
approx. 330 mm
approx. 650 g
330 x 10 mm
10.8 V
200 to 700 m/min
LPA: 90 dB(A)
2.5 m/sec2
100-240 V~50/60Hz
12.6 V
1 A
28.19Wh/2.61Ah
pliance with the statements given here!
3 Scope of delivery
BS/A (29810)
1 pc. Belt sander BS/A
1 pc. Connection adapter
1 pc. Rubber connecting piece
1 pc. Storage case
1 pc. Charger
1 pc. Battery
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Fan sander K 80
2 pcs. Fan sander K 180
BS/A (29812)
1 pc. Belt sander BS/A
1 pc. Connection adapter
1 pc. Rubber connecting piece
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Fan sander K 80
2 pcs. Fan sander K 180

4 Commissioning and operation

Charging the battery (Fig. 2 and 3)
Caution:
Before starting up, read the warning instruc-
tions and the labels attached to the charger
and the battery!
• Do not disassemble the battery or break the
housing! Electrolytes could leak out and
cause injuries! If electrolyte gets into your
eyes, rinse them with clean water and seek
medical attention immediately!
• Protect battery from overheating! Defects
could be the result.
• Never short-circuit the battery! Strong currents
could overheat the battery. Burns or a defect
could be the possible result. When storing the
batteries, ensure that the electric contacts
cannot establish a conductive connection.
• Do not put the battery in open fi re!