Installation; Power Supply; Operation Using The Mains; Installation And Start-Up - Promax MO-170 Manual De Instrucciones

USER'S MANUAL. MO-170

3 INSTALLATION

3.1 Power Supply

The MO-170 is an equipment powered through the mains for its operation.

3.1.1 Operation using the Mains

Connect the instrument to the mains through the AC voltage connector [12]
located on the MO-170 rear panel.
Check if the mains voltage is according to the equipment specifications.

3.2 Installation and Start-up

The MO-170 modulator is designed for use as a rack-mounted 19 inches device
(1U chassis).
Switch the main switch [13] located in the rear panel to position I (power on). After
a successfully start up, the equipment emits four acoustic tones to indicate that it is
ready to begin operation. When the equipment is connected to the mains, the green
LED LINE [3] remains lit.
12/2006 Page 11