Warranty - Amann Girrbach Ceramill Therm 3 Manual Del Usuario

M A L F U N C T I O N S , R E P A I R S A N D W A R R A N T Y
▷ Mount a new thermoelement in reverse order.
Pay attention to the correct polarity of the con-
E N
nection cables!
▷ Mount the furnace cover (please refer to
page 37).
▷ Plug in the mains plug and switch the furnace on
again as required.
Replacing a fuse
▷ Switch the furnace off and pull the mains plug.
▷ If required, wait until the furnace has cooled to
room temperature.
▷ On the rear side of the furnace, turn the fuse
holder in anticlockwise direction and pull it out
(bayonet lock).
▷ Replace the defective fuse against an identical
one (see Page 45).
▷ Insert fuse holder with new fuse in furnace rear
wall and lock it by twisting in clockwise direc-
tion.
8.3

Warranty

The warranty complies with the statutory provi-
sions. For more information, please refer to our
General Terms of Business.
In addition, it also applies that warranty and liabil-
ity claims are excluded for personal and property
damage, when these can be attributed to one or
more of the following causes:
_ Each person involved with operating, mounting,
maintaining, repairing the system must have
read and understood the User Manual. No liabil-
ity shall be assumed whatsoever for damages
and operating malfunctions resulting from non-
observance of the User Manual.
_ Use of the system not in accordance with the
intended use.
44
_ Improper mounting, starting-up, operation and
maintenance of the system.
_ Operation of the system with defective safety
devices or improperly mounted or inoperable
safety and protective devices.
_ Non-observance of the notes in the User Manual
in terms of transport, storage, assembly, start-
ing-up, operation, maintenance and equipping
the system.
_ Unauthorised modifications to the system.
_ Unauthorised modification of the operating
parameters.
_ Original parts and accessories are designed
especially for Ceramill Therm 3. When exchang-
ing components, use only original Ceramill
parts. Otherwise, the warranty shall become
void. For damages caused by the use of non-
original parts, Amann Girrbach shall exclude
any and all liability.
_ Disaster cases caused through foreign bodies
and force majeure.
Each furnace is subject to a factory test
run on behalf of the manufacturer. The
test run may cause discolouration to the
furnace compartment or sheet-metal
parts.