Measurement Cycle Lights; Analyzer Status Light; Product Components - Hach CL17sc Manual Del Usuario

2.2.2 Measurement cycle lights

The measurement cycle lights show the step of the measurement cycle being done. Refer to
Lights on
Description The cell is flushed with
water.

2.2.3 Analyzer status light

The analyzer status light changes from green to yellow when there is a warning or to red when there
is an error. Refer to Table
Color Description
Green Normal operation
Yellow The system needs attention to prevent a failure in the future. Measurements continue.
To show the warnings, push menu and select DIAGNOSTICS > [select analyzer] >
WARNING LIST. Refer to
Red The system needs immediate attention. Measurements have stopped.
To show the errors, push menu and select DIAGNOSTICS > [select analyzer] > ERROR
LIST. Refer to

2.3 Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Product components
1 CL17sc analyzer
2 Installation kit
Table 4 Measurement cycle lights
The buffer solution and the
indicator solution are added to
the cell.
5.
Table 5 Analyzer status light
Warnings—Yellow light
Errors—Red light on page 25.
on page 25.
Figure 2. If any items are missing or
3 Tubing Kit (tubing harness and stir bar)
Table
The sample is measured.
English 7
4.