Adjusting The Buckle Strap - Britax B-SAFE Guia Del Usuario

Securing Your Child

Adjusting the Buckle Strap

IMPORTANT: Your infant car seat has been assembled with the
buckle strap in the inner position for infants weighing less than
11 lbs (5 kg). Once your child reaches 11 lbs (5 kg) re-route the
buckle position to the outer slot. Follow the steps below to adjust
the buckle position. See page 6 and 28 for important information for
adjusting the harness straps for the fit of your child.
• Unbuckle the harness by
pressing the red button in
the center of the buckle and
sliding both harness tongues
out of the buckle.
• Locate the buckle strap
retainer on the bottom of the
infant car seat.
• Pull the buckle strap retainer
away from the seat to loosen.
• Turn the buckle strap retainer
so that the short side will go
through the slot in the infant
car seat shell and cover.
30
• Pull the buckle, retainer and
strap completely out of the
shell and cover.
• Turn the buckle strap retainer
so that the short side will go
through the slot in the infant
car seat cover and shell.
• Feed the retainer through the
slot in the cover and shell for
the desired buckle position.
• Once through, pull up on the
buckle from the top of the seat
to ensure that the buckle strap
is seated correctly.
Securing Your Child
31