Handle Position - Britax B-SAFE Guia Del Usuario

Securing Your Child
Securing an Infant continued
• Gently pull up on the harness
straps to tighten the lap
section of the harness, which
should fit low on the child's
body.
• Slowly pull the adjuster strap
to tighten the harness around
the child.
NOTE: Snugly adjust the belts provided
with this child restraint around your
child. A snug strap should not allow
any slack. It lies in a relatively straight
line without sagging. It does not
press on the child's flesh or push the
child's body into an unnatural position.
You should not be able to pinch the
webbing when snug.
• Position the chest clip at the
center of the child's chest,
level with the armpits.
34
• Verify that the harness is not twisted and the child is properly
secured. Check that the:
* Buckle is fastened
* Harness straps are not twisted
* Harness is snug
* Chest clip is level with armpits
IMPORTANT:
* Always pull on the harness after securing the child to make sure
the buckle and harness are fastened securely. If not, the buckle or
adjuster area may be clogged with food, drink, or objects that need
to be removed. See pages 39 – 41 for cleaning instructions.
* Always make sure that the harness is tight before each use, or after
any adjustments.

Handle Position

• The car seat handle must be
adjusted to one of the three
locked positions. To adjust,
press and hold both handle
release levers and rotate the
handle to the desired position.
Securing Your Child
35