Technical Data; Standard Accessories - Zhermack VAP 8 Manual De Usario

On the VAP 8 there is a label on the water filler plug
which says:
EXTREME CAUTION! HOT STEAM! (EXTREME CAUTION!
VERY HOT PRESSURISED STEAM!).
This label informs the user that there is a danger of high
temperature steam escaping when the water filler plug is
unscrewed: always proceed with maximum caution when
unscrewing the plug and observe the instructions given
in this handbook.
CHAPTER 4: TECHNICAL FEATURES
4.1 TECHNICAL FEATURES AND FUNCTIONING
PRINCIPLE
Zhermack creates qualitatively and technologically
advanced work instruments, in away that the user feels
that they are made-to-measure his everyday working
requirements.
Zhermack uses state-of-the-art instruments in the
design field when making these products, thus ensuring
maximum equipment functionality. The use of top quality
materials and performance of all inspections necessary
for operator safety guarantee Zhermack S.p.A products,
making them competitive at a worldwide level.
The operating principle of the VAP 8, VAP 8A is based on
the production of steam or hot water, with an operating
pressure up to 8 bars. The technical specifications are:
• high temperature steam production from fixed nozzle;
• electronic operation with on-gauge pressure display;
• electronic control of minimum water level with element
shutdown device and warning light;
• working pressure switch;
• dual safety device:
- overpressure switch with element shutdown device;
- warning light;
• safety valve;
• stainless steel 4-litre boiler with water refill of about 2.5
litres;
• safety fuse;
• (VAP 8A) 2 work modes are available:
- high temperature steam from gun;
- hot water from gun;
• (VAP 8A) quantity of water or steam exiting the gun can
be adjusted;
• (VAP 8A) connection to the mains water supply
completely managed by an electronic microprocessor
device.
• (VAP 8) boiler is filled with water manually.
The AD 8, instead, is a water softener. Utilisation of the AD
8 is advisable where the VAP 8A is connected to a mains
water supply. The AD 8 softener has been designed to
operate at working pressures of 1 - 8 bar. It has a stainless
steel body. It should only be supplied with cold drinking
water. Regeneration must be carried out with NaCl only
(common cooking salt).
VAP 8 / 8A - AD 8
4.2

TECHNICAL DATA

Technical data VAP 8 - VAP 8A:
Power supply
Max absorbed power
Protection rating IP
Noise level
Gun voltage
Boiler capacity
Boiler refill
Boiler dimensions (cm)
Overvoltage category
Applicable pollution degree
Technical data AD 8:
Working pressure
Water supply
Regeneration (NaCl)
The frequency with which regeneration needs to
be carried out depends on how often the AD 8
softener is used and the degree of purity of the
water. The installer will be able to provide
information regarding the hardness of the water
at the installation site.

4.2.1 STANDARD ACCESSORIES

Component
28. Water filler funnel (VAP 8)
29. Fuse
30. Gun support hook
31. Water inlet/outlet tap
connection hoses (VAP 8A)
32. Gun kit
(*) Please quote the order code when ordering a spare part.
You may order parts from your local Authorised Servicing
Centre.
4.2.2 WEIGHT AND OVERALL DIMENSIONS
Dimensions VAP 8 - VAP 8A (without packing)
Height (cm)
Width (cm)
Depth without tray (cm)
Depth with tray (cm)
Weight (kg)
Dimensions AD 8 (without packing)
Height (cm)
Width (cm)
Depth (cm)
Weight (kg)
The reference figures can be found on pages 3, 4, 5, 6 of this manual.
230 V ~ ± 10% 50 Hz
1700 W
IPX0
<70 dB
24 V
4 l
2.5 l
15.5(l)x31(p)x26(h)
II
EN
2
between 1 and 8 bar
cold drinking water
1 kg
Q.ty Code (*)
1 XI0020255
1 XE0802100
1 XI0020030
2 XF0486320
1 XR0020065
38
37
33
45
20
40
30
20
8.5
27