POWER MIG
180 DUAL
®
SETTING UP AND MAKING A ALUMINUM WELD USING SPOOL GUN
1. Disconnect Magnum Pro 100L Gun.
2. Install optional K2532-1 Magnum 100SG spool gun per
instructions included with gun.
3. Set Gun selector toggle switch to Spool Gun position. (See
Figure B.20)
4. Connect a bottle of 100% Argon shielding Gas per previous
section.
5. Follow the MIG welding steps in the previous section.
FIGURE B.20
6. Turn machine on and make weld per recommended settings
on Procedure Decal inside machine door.
B 11
OPERATION