Using The Wii Remote Jacket; Installing Batteries In The Wii Remote; Wearing The Wii Remote Wrist Strap - Nintendo Wii u Manual De Instrucciones

Using the Wii Remote Jacket

• Be sure that the Wii Remote Jacket is installed prior to gameplay to reduce the risk of harm
to the remote, surrounding objects, or people.
It might be necessary to remove the Wii Remote Jacket - for example, to replace the batteries
in the Wii Remote controller. If you do remove the Wii Remote Jacket, be sure to put it back
on before further play.

Installing Batteries in the Wii Remote

Pull the jacket from the base of
the controller and pull the wrist
strap out.
Pull the jacket up to expose the entire
battery cover and remove the cover.
Insert the batteries, negative (–) end
first. When removing batteries, re-
move the positive (+) end first.
Replace the battery cover and pull
the wrist strap back through the hole
in the bottom of the jacket. Pull the
jacket back over the base of the
controller.
28
If you completely remove the jacket,
replace it by inserting the controller
as shown - pushing it all the way into
the top of the jacket.
• Be sure to thread the wrist strap back through the hole
in the bottom of the jacket, as shown in step 4.
Insert the connector cover into the
external extension connector on the
bottom of the controller.

Wearing the Wii Remote Wrist Strap

Open the lever on the strap lock and place your hand through
the wrist strap. Hold the remote firmly during use.
Slide the strap lock up so that the strap will not fall off your
wrist. Close the lever to hold the lock in place.
29