Using A Pedal; Changing The Pitch (Transpose, Tuning, Octave Shift) - Casio CTK-4200 Guia Del Usuario

CTK4200_WK220_e.book 17 ページ ２０１１年４月１５日 金曜日 午前１０時１分

Using a Pedal

A pedal can be used to change notes in various ways while
playing.
• A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer. See page E-3
for information about options.
Connecting a Pedal Unit
Connect an optional pedal unit.
SUSTAIN/ASSIGNABLE JACK
Selecting the Pedal Effect
1. ct
Press (FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"OTHER" (page E-7).
Flashes
O T H E R
br
2.
Press (10-key) [9] (ENTER) key.
br
3.
Use the (10-key) [4] (o) and [6] (p) keys
to display "Jack".
J a c k
4. br
Use the (10-key) [–] and [+] keys to select
the pedal effect you want.
• The following shows the available pedal effects.
Sustain Sustains notes played while the pedal is
(SUS) depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.
Sostenuto Sustains notes that are playing when the
(SoS) pedal is depressed before the keyboard keys
are released.
Soft Slightly softens notes played while the pedal
(SFt) is depressed.
Rhythm Pressing the pedal starts and stops Auto
(rHy) Accompaniment or song playback.
Changing the Pitch
(Transpose, Tuning, Octave Shift)
Changing the Pitch in Semitone Steps
(Transpose)
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
ct
1.
Press (FUNCTION).
2. br
Use the
the transpose setting you want.
Fine Tuning (Tuning)
br
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
1. ct
Press (FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"Tune".
br
2.
Use the
the tuning.
• Performing this step causes the display to change from
"Tune" to a value that indicates the current frequency
setting as shown below. You can change the frequency
in 0.1 Hz steps.
• Even if you do not perform a
adjust the tuning, the current frequency setting will
appear automatically after a few seconds.
Controlling the Keyboard Sounds
T r a n s .
(10-key) [–] and [+] keys to select
T u n e
(10-key) [–] and [+] keys to adjust
4 4 0 . 0 H z
br
(10-key) operation to
br
E-17