Casio CTK-4200 Guia Del Usuario página 54

CTK4200_WK220_e.book 52 ページ ２０１１年４月１５日 金曜日 午前１０時１分
Recording Your Keyboard Play
To record to Tracks 1 through 6
1.
Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
"Recording and Playing Back Keyboard Play" (page
E-50).
Lights
3
2.
Press .
This will enter record standby.
Flashes
3. bt
Press a button from
number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
Flashes
• If you want to use a different tone than the one you
bn
used in Track 1, press
(10-key) to input the tone number.
bk
4.
Press .
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
E-52
cn
to to select the track
br
(TONE) and then use
5.
To stop recording, press
• To play back what you have recorded, press
bk
Each press of starts and stops playback.
6.
Repeat steps 2 through 5 to record the other
tracks.
7.
After you finish recording all of the tracks,
bk
press .
• This will start playback of the recorded tracks. Press
bk
to stop or restart playback.
• At this time you can turn off playback of specific tracks
bs cn
using buttons to . Pressing a key toggles
playback of each track on (track number displayed) or
off (track number not displayed).
• If you want to re-record a track, press
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
Disappears
8. 3
Press twice to exit the recorder mode.
Disappears
■ To delete a recorded track
After step 3 of the above procedure, do hold down
(without pressing any keyboard key) until the message
"Tr.Del?" appears on the display. Press [+] (YES) to delete the
track, or [–] (NO) to cancel the delete operation.
bk
.
bk
again.
3
. This will
3