Casio CTK-4200 Guia Del Usuario página 28

CTK4200_WK220_02_e.fm 26 ページ ２０１１年４月２０日 水曜日 午後３時３３分
Sampling Sounds and Playing Them on the Digital Keyboard
Deleting a Sampled Sound
You can use the following procedure to specify a sampled
tone number and delete its data.
1. ct
Press (FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"DELETE" (page E-7).
Flashes
D E L E T E
2. br
Press the (10-key) [9] (ENTER) key.
S 1 : O r
Used memory
(Unit: Kbytes)
3. br
Use the (10-key) [–] and [+] keys to select
the tone number of the data you want to delete.
4. br
Press the (10-key) [9] (ENTER) key.
This displays a delete confirmation message.
S u r e ?
5. br
Press the (10-key) [+] (YES) key to delete the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, "Complete" will
appear on the display followed by the screen in step 1
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see "Editing Sampled Drum Set
Sounds" on page E-24.
E-26
Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to protect each sampled
sound against accidental deletion.
br
1.
Press
enter the tone number of the sampled tone you
want to protect.
2.
Press
(10-key) [4] (o) and [6] (p) keys to display
"SAMPLING" (page E-7).
3.
Press the
4.
Use the
to display "Protect".
n l
g
Remaining
5.
memory capacity
Press the
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
■ Saving Sample Data on an External Device
See page E-62 for details about how to transfer sampled data
to a computer for storage.
bn br
(TONE) and then use
ct
(FUNCTION) and then use the
br
(10-key) [9] (ENTER) key.
br
(10-key) [4] (o) and [6] (p) keys
P r o t e c t
br
(10-key) [+] key to turn on
* 1 : O r
g
Protected
(10-key) to
br
n l