Sampling Sounds And Playing Them On The Digital Keyboard; Connection And Preparation - Casio CTK-4200 Guia Del Usuario

CTK4200_WK220_02_e.fm 19 ページ ２０１１年７月８日 金曜日 午後２時７分
Sampling Sounds and Playing Them on the Digital
Keyboard
You can sample a sound from a microphone, a portable audio
player, or other device, and then play the sound on the
keyboard. For example, you could sample the bark of your
dog and then use the sound in a melody. You also can sample
and use passages from a CD. The sampling feature is a great
way to create new sounds that are highly creative.

Connection and Preparation

• Before connecting, make sure that this Digital
Keyboard, as well as the microphone (WK-220 or
WK-225) or external device (CTK-4200) being
connected, are all turned off.
1.
Connect a microphone or external device to the
Digital Keyboard.
<CTK-4200>
Stereo mini plug
Digital Keyboard AUDIO IN jack
<WK-220/WK-225>
• You cannot sample sounds input from through the
AUDIO IN jack.
MIC IN/SAMPLING jack
B
CD player, Cassette player,
etc.
bs bsbt btck ckcl clcm cmcn cn
• Use a commercially available dynamic microphone.
• Connection of an external device requires commercially
available connecting cords, supplied by you. Connecting
cords should have a stereo mini plug on one end and a plug
that matches the configuration of the external device on the
other end.
2.
Turn down the volume levels of the external
device and the Digital Keyboard.
3.
Turn on the external device or microphone, and
then turn on the Digital Keyboard.
• When using a microphone, adjust the input volume
ek
level with (MIC VOLUME).
• It will take a few seconds after you turn on the Digital
Keyboard before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
bo bobn bn br br
cr cr ct ct cs cs
E-19