GUTMANN Capa Instrucciones De Montaje página 25

8. Lift up the extractor hood with 2 men
(3) Make sure that the fastening screws
are fitted into the "pear-shaped holes"
on the top of the extractor hood (3).
Then push the extractor hood back-
wards (4) to lock it in position.
9. Then tighten the extractor hood
through the mounting hole using a
ratchet and extension arm.
10. Now fold up the hood lower part (D)
again and screw it on using the securing
bolts (E).
11. Replace the metal filters in the filter
mount (fasten the locking hook).
12. Carry out a function test.
en
25