CONCORD ULTIMAX Instrucciones De Montaje página 45

4. Adjusting the seat to the child's size / adjusting the head support and harness
4.6
Pull the two metal clasps on the
back of the seat out of their
recesses and fit them through
the belt openings in the seat shell.
4.7
0123-04
Then pull the two belts out to the
front through the backrest and
the seat cover.
Now thread both belts from the
front through the cover and into
the required slot.
On the back you must thread
both belts back into the
connecting piece, then tighten
the belt at the front by the central
belt.
Please check that the left and
right harness belts are both
adjusted in the same way.
0251-01
0042-07