Optional Dynamic Footplate; Optional Angle Adjustable Footplate - Ki Mobility Ethos Manual De Instrucciones

V. SET UP & USE OF YOUR WHEELCHAIR
G. Optional Dynamic Footplate
Angle adjustment of your footrest
1. Loosen the two screws (Fig. 6:A) on the bottom of the footrest using a 4mm Allen wrench.
2. Rotate footrest to desired angle and secure in place by retightening the two screws.
H. Optional Angle Adjustable Footplate
To adjust the angle of the optional angle adjustable footplates:
1. Loosen but do not remove, the two M6 screws (Fig. 7:A) securing the footplate to the
footplate clamp with a 4mm Allen wrench.
2. Once loose, the footplate will easily rotate around the footrest extension tube.
3. Select the desired position and retighten the two M6 screws (Fig. 7:A) to 80 in./lbs (9.04
N*m).
Changing position of the optional aluminum flip-up footplate:
1. Remove both M6 screws from the footplate. There are M6 nylock nuts recessed on the
underside of the clamp. Be sure to prevent these from falling as you loosen the screws.
2. Relocate the footplate once the screws are loose by rotating either forward or rearward,
depending on desired angle. Once position is achieved, reinsert the screws into the
appropriate holes.
3. Fit the nuts into the slot underneath the clamp and tighten the screws securely.
Fig. 6
Fig. 7
A
A
17