Environmental Protection - Mettler Toledo IND560 PDX Guia De Instalacion

IND560 PDX Installation Manual
2. Repeat Step 1 for the other slot.
3. After releasing the front panel, lift the bottom of the front panel firmly up and
out (Figure 2-3, 1) until it completely clears the top edge of the bottom
enclosure.
4. Squeeze the top of the front panel to the enclosure slightly and push upward
(Figure 2-3, 2) to unsnap the top two clips, then lift it to clear the two top
clips. The cover will swing down, hinged by two wire cables at the bottom.

Environmental Protection

2-2
Figure 2-2: Opening the Harsh Enclosure
2
1
Figure 2-3: Removing the Cover
NOT ALL VERSIONS OF THE IND560 ARE DESIGNED FOR USE IN
HAZARDOUS (EXPLOSIVE) AREAS. DO NOT USE THE IND560 PDX
TERMINAL IN AREAS CLASSIFIED AS HAZARDOUS BECAUSE OF
COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES. CONTACT AN
AUTHORIZED METTLER TOLEDO REPRESENTATIVE FOR INFORMATION
ABOUT HAZARDOUS AREA APPLICATIONS.
WARNING!