Mettler Toledo IND560 PDX Guia De Instalacion página 6

This device complies with Part 15 of the FCC Rules and the Radio Interference
Requirements of the Canadian Department of Communications. Operation is
subject to the following conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his or her own expense.
Declaration of conformity is located on the documentation CD.
NOTE ON FIRMWARE VERSIONS
This manual describes features and functions of the IND560 PDX terminal
which utilizes version 4.xx firmware or higher, only. The IND560 PDX terminal
requires a unique version of firmware which has been compiled specifically for
the IND560 PDX. Do not load standard IND560 or IND560x firmware into an
IND560 PDX.
Statement regarding harmful substances
We do not make direct use of harmful materials such as asbestos, radioactive
substances or arsenic compounds. However, we purchase components from
third party suppliers, which may contain some of these substances in very small
quantities.
FCC Notice