Preliminary Controls - SWM RS 300 R 2017 Guía Rápida

PRELIMINARY CONTROLS

A. Engine-transmission oil level
Keeping the motorbike level and upright, check the
oil level through the inspection (1) window on the
right crankcase. Make sure the level is in between
the MIN and MAX notches.
To fill up, remove the filler cap (2).
1
2
EN - 6
B. Fuel level
Check the level in the tank, top up as needed.
MAX
MIN
C. Coolant level
Check level (1) in right-hand radiator when engine
is cold (place the motorbike fully upright). The cool-
ant should be approximately 10 mm above the cells
and should also not exceed the halfway mark in the
recovery tank (2) located in front of the rear shock
absorber. The radiator cap (3) is provided with two
locking positions: the first one is for prior discharge
of pressure in the cooling system.
WARNING:
Avoid removing radiator cap when engine
is hot, as coolant may spout out and cause
scalding.
1
2
3