Removal From Storage - Honda XRE300 Manual Del Propietário

90
4. Remove the battery. Store in an area protected
from freezing temperatures and direct sunlight.
Slow charge the battery once a month.
5. Wash and dry the motorcycle. Wax all painted
surfaces. Coat chrome with rust-inhibiting oil.
6. Lubricate the drive chain (page 69).
7. Inflate the tyres to their recommended pressures.
Place the motorcycle on blocks to raise both tyres
off the ground.
8. Cover the motorcycle (don't use plastic or other
coated materials) and store in an unheated
area, free of dampness with a minimum of
daily temperature variation. Do not store the
motorcycle in direct sunlight.

Removal From Storage

1. Uncover and clean the motorcycle.
2. Change the engine oil if more than 4 months
have passed since the start of storage.
3. Charge the battery as required. Install the battery.
4. Drain any excess aerosol rust-inhibiting oil from
the fuel tank. Fill the fuel tank with fresh petrol.
5. Perform all Pre-ride Inspection checks (page 44).
Test ride the motorcycle at low speeds in a safe
riding area away from traffic.
XRE300 · XRE300A