Switching Off; Clock Settings - EdilKamin Evolution Serie Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para Evolution Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
sk tecnica soleil-polaris-tania multilingua_vers E 03 05 2011.qxp
03/05/2011
16.36
Pagina 40

Switching off

The stove switches off with the room air fans at the same power that they were working at for greater comfort.
Hold the ON/OFF key down for two seconds (on the mimic panel or the remote control) whilst the stove is operating.
The shutdown procedure starts and a timer appears on the display and begins counting backwards, varying according
to the power that the stove was operating at when the shutdown procedure was started.
During shutdown (the objective of which is to put the flame out, not leave unburnt material in the combustion chamber
and cool the stove):
• Pellet loading ceases.
• Ventilation remains active at the same level that the stove was operating at.
• The smoke expulsion motor is active.
Never unplug the stove whilst it is shutting down.
SETTINGS

Clock settings

Hold the "Menù" key down for two seconds, then use the + and – keys and follow the instructions on the display to
open the "clock" Menu. This menu is used to set the clock on the electronic circuit board.
By pressing the "Menù" key afterwards, the following data appears sequentially and can be adjusted:
Day, Month, Year, Hour, Minute, Day of week.
The message Save?? appears, allowing you to check the operations carried out before confirming them with the
"Menù" key (Saved is then displayed on the screen)
Programs controlling times at which the stove is turned on and off throughout the week.
To set the clock, hold the "Menù" key down for 2 seconds then press the + key to proceed to the weekly timer
programming function, marked as "Program on/off" on the display.
The programming function lets you set the times at which the stove is to be turned on and off every day (up to three
times) for every day of the week.
Confirm with the "Menù" key and one of the following messages will be displayed:
NO PROGR ( no program set)
DAILY/PROGRAM (single program for all days)
WEEKLY/PROGRAM (a setting for each day)
Use the + and – keys to pass from one to another.
Using the "Menù" key, confirm the "DAILY/PROGRAM" option to choose the number of programs (turning
on/off)that can be carried out in one day.
"DAILY/PROGRAM" sets the same program(s) for every day of the week.
The following messages are displayed when + is then pressed:
- No progr
- 1st progr (on and off once a day), 2nd program (likewise), 3rd program (likewise)
Press the key to display them in reverse order.
Select the 1st program to display the on time.
The following appears on the display: 1 ON ore 10,30; use the +/ – key to set the time required and press "Menù" to
confirm.
Follow the same procedure to set the off times. When "Save" appears on the display, press the "Menù" key to confirm
the program.
"WEEKLY/PROGRAM" requires selection of the day on which to execute the programming:
1 Mo; 2 Tu; 3 We; 4 Th; 5 Fr; 6 Sa; 7 Su
Select the day by scrolling through them using the + and – keys, pressing the "Menù" key to confirm; proceed with
programming following the same procedure described for the "DAILY/PROGRAM", choosing whether to enable a
program for each day of the week and defining how many operations and at what times.
Press the 0/1 key to exit the program at any time in the event of an error; the message Saved will then appear on the
screen.
Notes on flame variability
Changes in the flame depend on the type of pellets used, flame variability commonly associated with solid fuel and
periodic cleaning of the combustion chamber carried out automatically by the stove.
N.B. automatic stove cleaning does not replace cold vacuum cleaning that must be carried out by the user before
ignition.
39

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

SoleilTaniaPolaris

Tabla de contenido