EdilKamin Evolution Serie Instalación Uso Y Mantenimiento página 41

sk tecnica soleil-polaris-tania multilingua_vers E 03 05 2011.qxp
REMOTE CONTROL cod. 633310
ignition / shutdown button (press for approximately 1 second) this button can also be pressed to
:
exit the programming menu
+
: button to increase the power/operating temperature (when inside a menu, it increases the displayed
variable)
-
: button to decrease the power/operating temperature (when inside a menu, it decreases the displayed
variable)
A : button to switch to the "EASY TIMER " program
M : button to toggle from automatic to manual mode and vice versa
DESCRIPTION OF DISPLAY SYMBOLS OF THE REMOTE CONTROL
Indicates data transmission between the
remote control and the control board.
low batteries; replace them and put them in
their appropriate containers.
blocked keypad; avoid turning on the remote control
for no reason (press "A" and "M" simultaneously for
a few seconds to block/unblock the keypad)
Indicates that ignition / shutdown is being via the
"EASY TIMER" program
Indicates that a setting has been transmitted for
the stove to ignite
03/05/2011 16.36
fan speed indicator
pellet/water thermo stove remote control
setting indicator
pellet/water stove remote control setting
indicator
automatic function
(the temperature value appears on the display)
manual adjustment function
(the operating power value appears on the display)
Indicates the room temperature detected by
the remote control (it indicates the values of
the set parameters during its technical set-up).
41
Pagina 42