Publicidad
Idiomas disponibles
Idiomas disponibles
PW30AOV Owner's Manual
OPERATION
CONTROLS
A - Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - High Pressure Hose — Connect one end to water pump and
the other end to spray gun.
C - Spray Tips — Detergent, 0°, 15°, 25° and 40°: for various
high pressure cleaning applications.
D - Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
E - Air Filter — Protects engine by filtering dust and debris out
of intake air.
F - Choke Lever — Prepares a cold engine for starting.
G - Fuel Valve — Used to turn fuel supply on/off to engine.
H - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
J - Recoil Starter — Used for starting the engine manually.
K - Oil Fill/Dipstick — Check and add engine oil here.
L - Nozzle Extension with Quick Connect — Allows you to
switch between five different spray tips
Automatic Cool Down System (Thermal Relief)
If you run the engine on your pressure washer for 3‑5 minutes without pressing the trigger on the spray gun, circulating water in
the pump can reach temperatures above 125°-155°F (51°-68°C). The system engages to cool the pump by discharging the
warm water onto the ground.
Part No 210500
M - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F (51°-68°C). Warm
water will discharge from pump onto ground. This system
prevents internal pump damage.
N - Water Inlet — Connection for garden hose.
P - Detergent Siphoning Tube/Filter — Use to siphon
pressure washer safe detergent into the low pressure
stream.
Q - Identification Label — Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
R - High Pressure Outlet — Connection for high pressure
hose.
S - Pump — Develops high pressure.
T - Pressure Control Knob — Varies pressure of high
pressure spray.
U - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
10
Form No F021816A
Publicidad
