Operation
8. Operation
8.1. Autostart
AUTOSTART mode ensures that the charging station is always ready to provide the recharging service, without needing to identify the
client who wants to activate it. Just insert the plug to begin the recharging operation.
To end the operation, disconnect the cable from the car side first; this will release the cable on the station side too.
8.2. Stand-Alone with RFID card reader
When charging with RFID cards, the session is activated and interrupted by using the RFID cards supplied by the provider and already
added to the local White List of that station.
8.3. Via mobile app and cloud platform
In connected mode, the station is connected to a management platform. This platform is used to control and monitor the station while
it's working, and save the recharging sessions. The end client can also autonomously access the service via a mobile app or via RFID
cards linked with his/her profile.
7.55.4.502.0 - Installation and Operation Manual
Gewiss
IT
EN
FR
ES
DE
RO
HU
NL
61