Use Of The Device; Energy Saving Tips; Defrosting The Device - Indel B FM7 Instrucciones De Uso

ENGLISH

USE OF THE DEVICE

Attention
Before the first start-up of the device, clean the inside with water and neutral detergent and dry with a
soft cloth.
Attention
The compressor of the cooling circuit starts approximately 60 seconds after the device has been started.
Attention
Temperature inside the device is related to room temperature. If room temperature drops below 4 °C, make
sure the internal temperature does not drop below the fixed point of 5 °C.
ENERGY-SAVING TIPS
• Place the device in a well ventilated place protected from sunlight.
• Do not open the door of the device more often than required.
• Do not leave the door open longer than required.
• Defrost the device at regular intervals, however as soon as the ice layer can be seen.

DEFROSTING THE DEVICE

Proceed as follows for the regular defrosting of the device:
• Remove the products stored inside and place them into another device so that storage temperature
can be ensured.
• Open the door of the device to melt the layer of ice.
Attention
Do not use hard and/or sharp objects to remove the layer of ice and release the frozen products.
• Dry condensation with a soft cloth and close the door.
STORING PRODUCTS
Products can only be stored in the original packages or in appropriate containers inside the device.
Make sure that only products that can be cooled at reference temperatures are stored in the device: see
TECHNICAL DATA table.
18
FM7
FM7_24-11-2016