Environmental Protection; Troubleshooting - inventiv INV T6553 TBV Manual De Instrucciones

10. ENVIRONMENTAL PROTECTION

1) Environmental protection should be a priority of considerable importance when using the
machine, for the benefit of both social coexistence and the environment in which we live.
Try not to cause any disturbance to the surrounding area.
2) Scrupulously comply with local regulations and provisions for the disposal of packaging,
oils, petrol, filters, damaged parts or any elements which have a strong impact on the envi-
ronment; this waste must not be disposed of as normal waste, it must be separated and
taken to specified waste disposal centres where the material will be recycled.
3) Scrupulously comply with local regulations for the disposal of waste materials after mowing.
4) When decommissioning, do not pollute the environment with the machine, but hand it over
to a disposal centre, in accordance with the local laws in force.

11. TROUBLESHOOTING

Problem?
The petrol-driven lawnmow-
er doesn't work
The cut grass is not col-
lected in the grass catcher
Mowing is difficult
The machine starts to
vibrate abnormally
For any doubts or problems, please do not hesitate to contact your nea-
rest Customer Service Centre or Your Dealer.
14
EN
What to Check:
– No oil or fuel in the engine?
– The spark plug and filter are
not in good condition?
– The lawnmower's fuel tank was
not emptied at the end of the
previous season?
– The cutting means has
received a knock?
– The inside of the chassis is
dirty?
– The cutting means is not in
good condition?
- Damaged or loose parts?
What to do:
– Check the oil and fuel levels.
– Clean the spark plug and filter
which may be dirty or replace
them.
– The float may be blocked; tilt
the lawnmower on the carbu-
rettor side.
– Have the cutting means sharp
ened or replace it.
Check the fins that direct the
grass towards the grass
catcher.
– Clean the inside of the chas
sis to ease the grass discharge
towards the grass catcher.
– Have the cutting means sharp
ened or replace it.
- Stop the machine and discon
nect the spark plug cable
Inspect for damage
Check for and tighten any loose
parts.
Have all checks, repair work
and replacements carried out
by a specialized Centre only.