Setting the upper end limit
1) Position the awning at the upper end limit.
Press and hold the Up button for > 2 s to raise the
awning in one continuous movement.
2) Stop the awning at the desired point.
3) If necessary, adjust the position of the awning using the
Up or Down buttons.
4) Press the «my» and Down buttons simultaneously: the
awning will be lowered in one continuous movement,
even after the «my» and Down buttons have been
released.
$W PLGKHLJKW EULHÀ\ SUHVV WKH ©P\ª EXWWRQ WR VWRS WKH
awning, and go to the section «6HWWLQJ WKH ORZHU HQG
OLPLW».
Setting the lower end limit
1) Put the awning in the lower end limit position.
Press and hold the Down button for > 2 seconds to
lower the awning in one continuous movement.
2) Stop the awning at the desired point.
3) If necessary, adjust the position of the awning using the
Up or Down buttons.
4) Press the «my» and Up buttons simultaneously: the
awning will be raised in one continuous movement, even
after the «my» and Up buttons have been released.
$W PLGKHLJKW EULHÀ\ SUHVV WKH ©P\ª EXWWRQ WR VWRS WKH
awning.
6) Press the «my» button again until the awning moves:
the end limits have been programmed. Go to the section
«3URJUDPPLQJ WKH ¿UVW 6RPI\ LR ORFDO FRQWURO SRLQW».
5.4.2. 6HWWLQJ IRU YHUWLFDO DZQLQJV ZLWK XSSHU VWRS RQO\
For awnings with upper stop (load bar stopped under the head rail), the upper end limit is
automatically adjusted, while the lower end limit must be set.
Setting the lower end limit
Do not press the «my» and Down buttons simultaneously to reach the lower end limit
1)
Put the awning in the lower end limit position.
Press and hold the Down button for > 2 seconds to
lower the awning in one continuous movement.
2) Stop the awning at the desired point.
3) If necessary, adjust the position of the awning using the
Up and Down buttons.
4) Press the «my» and Up buttons simultaneously: the
awning will be raised in one continuous movement, even
after the «my» and Up buttons have been released.
$W PLGKHLJKW EULHÀ\ SUHVV WKH ©P\ª EXWWRQ WR VWRS WKH
awning.
6) Press the «my» button again until the awning moves:
the end limits have been programmed, go to the section
«3URJUDPPLQJ WKH ¿UVW 6RPI\ LR ORFDO FRQWURO SRLQW».
Copyright © 2011 Somfy SAS. All rights reserved.
1
2
3
4
5
6HWWLQJ WKH ORZHU
HQG OLPLW
1
2
3
4
5
6
1
2
3
4
5
6
Sunea screen io
7