Assembly; Operation - Craftsman 315.HD2000 Manual Del Operador

unPAckInG
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARnInG:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PAckInG LIST
Hammer Drill with Auxiliary Handle Assembly
Depth Stop Rod
Bits
Operator's Manual
WARnInG:
If any parts are damaged or missing do
not operate this tool until the damaged or missing
parts are replaced. Use of this product with dam-
aged or missing parts could result in serious per-
sonal injury.
WARnInG:
Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
WARnInG:
Always remove battery pack from
the tool when you are assembling parts, making
adjustments, cleaning, or when not in use. Removing
battery pack will prevent accidental starting that
could cause serious personal injury.
WARnInG:
Always wear eye protection with side
shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your
eyes, resulting in possible serious injury.

ASSEMBLY

WARnInG:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARnInG:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
InSTALLInG AuXILIARY HAnDLE ASSEMBLY
See Figure 2, page i.
WARnInG:
using this tool to help resist torque reactions. Bind-
ing or stalling of this product could lead to serious
personal injury.
An auxiliary handle is packed with the drill for ease of
operation and to help prevent loss of control.
 Insert and push screw all the way through slot on drill.
 Attach plate and auxiliary handle to screw and tighten.
 Insert end of depth stop rod into depth stop rod slot on
the back of the plate.

OPERATIOn

WARnInG:
sories not recommended by the manufacturer of
this tool. The use of attachments or accessories not
recommended can result in serious personal injury.
APPLIcATIOnS
You may use this tool for the following purposes:
 Hammer drilling in concrete, brick, or other masonry
 Drilling in all types of wood products (lumber, plywood,
paneling, composition board, and hard board), ceramics,
plastics, fiberglass, laminates, and metals; driving screws
into wood and drywall with screwdriver bits.
7 – English
Do not attempt to modify this tool
To prevent accidental starting that
Always use the auxiliary handle when
Do not use any attachments or acces-