Elettric Saw Components; Safety Precaution - Efco MT 1800E Manual De Instrucciones

2. ELEC TRIC SAW COMPONENTS
(Fig. 2)
I
1. Safety button
2. On/off switch
GB
3. Chain brake lever
4. Guide bar
5. Chain
F
6. Oil tank cap
7A. Chain guard fastening knob
7B. Chain tensioner ring
D
8. Chain cover
9. Cable - Plug
10. Front handle
E
11. Rear handle
12. Oil level
SK
13. Bar cover
14. Power cable fixing hook
P
3. SAFETY PRECAUTIONS
General Power Tool Safety Warnings
GR
WARNING - Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
TR
shock, fire and/or serious injury.
Save all warnings and instructions for future
CZ
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
RUS
battery-operated (cordless) power tool.
UK
1) Work area safety
a) Keep work area clean and well lit.
PL
Cluttered or dark areas invite accidents.
b) D o n o t o p e r a t e p o we r t o o l s i n
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
w h i l e o p e r a t i n g a p o w e r t o o l .
Distractions can cause you to lose control.
22
2) Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs with
ear thed (grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
c o r d f o r c a r r y i n g , p u l l i n g o r
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing
a n d u s e c o m m o n s e n s e w h e n
operating a power tool. Do not use a
power tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safet y shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before